hot runner system
hot runner system
热流道
câmara quente
CANAUX CHAUDS|CANAUX CHAUDS système des moules|CANAUX CHAUDS système en Chine
alergător la cald|alergător la cald China
горячеканальная плесень|китайский производитель горячеканальных систем
Sistema de moldeo por inyeccion fabricados en China
Moldes de injeção sitema de injeção fabricante China
Горячеканальная|Горячеканальная система вытворца
nhựa phun keo nóng|Hệ thống phun nhựa đuôi keo nóng nhà sản xuất
COLADA CALIENTE|ANOLE SISTEMA DE COLADA CALIENTE

Home > blog >

Why hot runner mould need testing mould?

Date:2011-12-21

Why hot runner mould need testing mould?

Most formed products drawback is cased by plasticzing and injection processing,and sometimes relevent to the mold design.The impact factors include:the cavity number, cold/hot runner system design,type of inject portal.location and dimension,and the structure of the product.hot runner mould

In order to aviod bring the drawback from the mold design,we need analysis the mold design and the technological parameter when we need to produce the mould.
After obtain the result of testing mould,(Hot runner mould),the operator usually need to assess the specific situation of mould and avoid to increasing the unnecessarily cost and timedie in the modified process.hot runner mould
 



In most cases, the evaluation also includes the machine in the process parameters Settings.That is,in order to make up the deficiency of the mould design, the operator may unknowingly was not correct Settings. (hot runner mould)In this case, the production equipment operation process is not normal, because production qualified products the needed parameters Settings range is very small, once the parameters set any small deviation, may result in the end product of quality far beyond the range of error allowed, and the resulting actual production cost often beforehand than the mold optimal costs of much higher.hot runner mould

The purpose of the testing mould is to find out the optimization process parameters and mold design. So, even materials, machine set or environmental factors have changed, still can ensure a stable and continuous mass production of the environment, and not just to get a good sample. That's very important.hot runner mould
 

If you are interested it,Welcome to contact me.

Contact person:Tina

Skype:anole-01

service1003@anole-hot-runner.com

Kewords:Hot runner mould   

Quick SearchSearch Products&News

Download Center

Contact Us

  • Quality wins the market,Quality comes from Responsibility
  • Add:369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China
  • Tel:+86-576-81106952
  • Fax:+86-576-84018996
  • E-mail:
    service5@anole-hot-runner.com       

          anole-hc-02@hotmail.com